Who wants a Kiwi?

Talk about everything hardware related

Re: Who wants a Kiwi?

Postby Chris » Fri Apr 11, 2014 6:43 pm

nice job, where did you find the molex connector for the ide power? I've been unable to source one.
Chris
Developer
 
Posts: 279
Joined: Thu Apr 04, 2013 7:53 pm
Location: England, UK

Re: Who wants a Kiwi?

Postby linux68k » Fri Apr 11, 2014 9:55 pm

Jameco has them, I think this is what you are looking for
JS-1114-04WS-R
linux68k
Developer
 
Posts: 59
Joined: Thu Feb 28, 2013 3:09 am

Re: Who wants a Kiwi?

Postby SteveMoody » Fri Apr 11, 2014 9:59 pm

SteveMoody
Developer
 
Posts: 273
Joined: Sat Mar 08, 2014 1:23 pm
Location: South Wales, UK

Re: Who wants a Kiwi?

Postby Chris » Sat Apr 12, 2014 1:32 pm

thanks guys
Chris
Developer
 
Posts: 279
Joined: Thu Apr 04, 2013 7:53 pm
Location: England, UK

Re: Who wants a Kiwi?

Postby simon » Mon Jun 02, 2014 12:32 pm

Pretty busy pre-soldering the SMT parts of the upcoming Kiwi kit...
Soldering-A4.png
simon
Site Admin
 
Posts: 742
Joined: Thu Sep 13, 2012 9:35 am
Location: Luedenscheid, Germany

Re: Who wants a Kiwi?

Postby linux68k » Tue Jun 03, 2014 5:11 pm

Hi Simon

Do you have a cost for the kits?
linux68k
Developer
 
Posts: 59
Joined: Thu Feb 28, 2013 3:09 am

Re: Who wants a Kiwi?

Postby simon » Tue Jun 03, 2014 5:36 pm

It will be around 350€ + PSU (25€) + 4MB SIMM (10€) + shipping (depends on where you live).
You'll get the board (with SMT parts pre-soldered) and every other parts, but the SIDs. If you don't have the original 6581 or 8580 you can get one or two SwinSIDs for another 15€ each. The Atmega, Eprom and CPLD will come pre-programmed with a working version of the firmware(s). In addition I will offer a CF card (9€), CF-IDE adapter (2€) and the needed power cable + adapter (2,50€).
What I can't offer are a keyboard, a mouse or an enclosure (case).
simon
Site Admin
 
Posts: 742
Joined: Thu Sep 13, 2012 9:35 am
Location: Luedenscheid, Germany

Re: Who wants a Kiwi?

Postby msch » Mon Jun 16, 2014 11:44 am

I want one - too (complete kit) :)
msch
 
Posts: 1
Joined: Mon Jun 16, 2014 11:29 am

Re: Who wants a Kiwi?

Postby linux68k » Tue Jun 24, 2014 5:36 pm

Hi Simon

Do you have any bare boards and what is the cost?

Thanks Tony
linux68k
Developer
 
Posts: 59
Joined: Thu Feb 28, 2013 3:09 am

Re: Who wants a Kiwi?

Postby simon » Tue Jun 24, 2014 6:02 pm

Hi Tony,

the boards of the last batch run are presoldered already, but I still have a spare bare board from the previous run. This would cost 75€ plus shipping.
There is one presoldered board where two databus pins of the cs8900a show infinite resistance. That never happened before and I don't want to sell it with a kit. If you want to try (and maybe have to remove the CS8900a) you can have it for 90€ plus shipping. Otherwise I would keep it and eventually build it myself.

Best
Simon
simon
Site Admin
 
Posts: 742
Joined: Thu Sep 13, 2012 9:35 am
Location: Luedenscheid, Germany

PreviousNext

Return to Hardware

Who is online

Users browsing this forum: No registered users and 1 guest